# Makefile.in generated by automake 1.11.1 from Makefile.am.
# libwulf/Makefile.  Generated from Makefile.in by configure.

# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
# Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.



pkgdatadir = $(datadir)/wulfware
pkgincludedir = $(includedir)/wulfware
pkglibdir = $(libdir)/wulfware
pkglibexecdir = $(libexecdir)/wulfware
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_HEADER = $(INSTALL_DATA)
transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
build_triplet = x86_64-unknown-linux-gnu
host_triplet = x86_64-unknown-linux-gnu
subdir = libwulf
DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
	$(ACLOCAL_M4)
mkinstalldirs = $(install_sh) -d
CONFIG_HEADER = $(top_builddir)/config.h
CONFIG_CLEAN_FILES =
CONFIG_CLEAN_VPATH_FILES =
SOURCES =
DIST_SOURCES =
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
ACLOCAL = ${SHELL} /home/rgb/Src/Projects/wulfware/missing --run aclocal-1.11
AMTAR = ${SHELL} /home/rgb/Src/Projects/wulfware/missing --run tar
AR = ar
AUTOCONF = ${SHELL} /home/rgb/Src/Projects/wulfware/missing --run autoconf
AUTOHEADER = ${SHELL} /home/rgb/Src/Projects/wulfware/missing --run autoheader
AUTOMAKE = ${SHELL} /home/rgb/Src/Projects/wulfware/missing --run automake-1.11
AWK = gawk

#========================================================================
# Define parameters and directives needed in compile/link steps.
#========================================================================
# C Compiler
CC = gcc
CCDEPMODE = depmode=none

# Compile flags.  -fpic creates "position independent code" for
# shared libraries!
CFLAGS = -O3 -I/usr/include/libxml2 -I ../include $(DEFINES) 
CPP = gcc -E
CPPFLAGS = 
CYGPATH_W = echo
DEFS = -DHAVE_CONFIG_H
DEPDIR = .deps
DSYMUTIL = 
DUMPBIN = 
ECHO_C = 
ECHO_N = -n
ECHO_T = 
EGREP = /bin/grep -E
EXEEXT = 
FGREP = /bin/grep -F
GREP = /bin/grep
INSTALL = /usr/bin/install -c
INSTALL_DATA = ${INSTALL} -m 644
INSTALL_PROGRAM = ${INSTALL}
INSTALL_SCRIPT = ${INSTALL}
INSTALL_STRIP_PROGRAM = $(install_sh) -c -s
LD = /usr/bin/ld -m elf_x86_64

# Linker flags
LDFLAGS = -g -fpic --shared -Wl,-soname,$(PROGLIB_SONAME)
LIBOBJS = 

# Libraries
LIBS = -lpthread -lxml2 -lm 
LIBTOOL = $(SHELL) $(top_builddir)/libtool
LIPO = 
LN_S = ln -s
LTLIBOBJS = 
MAINT = #
MAKEINFO = ${SHELL} /home/rgb/Src/Projects/wulfware/missing --run makeinfo
MKDIR_P = /bin/mkdir -p
NM = /usr/bin/nm -B
NMEDIT = 
OBJDUMP = objdump
OBJEXT = o
OTOOL = 
OTOOL64 = 
PACKAGE = wulfware
PACKAGE_BUGREPORT = 
PACKAGE_NAME = wulfware
PACKAGE_STRING = wulfware 2.6.0
PACKAGE_TARNAME = wulfware
PACKAGE_VERSION = 2.6.0
PATH_SEPARATOR = :
RANLIB = ranlib
RELEASE = 0
RELEASED = 
SED = /bin/sed
SET_MAKE = 
SHELL = /bin/sh
STRIP = strip

# This is automagically set in the toplevel build.  Do not edit by
# hand.
VERSION = 2.6.0
WULFWARE_CFLAGS = -I${prefix}/include
WULFWARE_LIBS = -L${exec_prefix}/lib -ldieharder
WULFWARE_LT_VERSION = 0:0:0
abs_builddir = /home/rgb/Src/Projects/wulfware/libwulf
abs_srcdir = /home/rgb/Src/Projects/wulfware/libwulf
abs_top_builddir = /home/rgb/Src/Projects/wulfware
abs_top_srcdir = /home/rgb/Src/Projects/wulfware
ac_ct_CC = gcc
ac_ct_DUMPBIN = 
am__include = include
am__leading_dot = .
am__quote = 
am__tar = ${AMTAR} chof - "$$tardir"
am__untar = ${AMTAR} xf -
bindir = ${exec_prefix}/bin
build = x86_64-unknown-linux-gnu
build_alias = 
build_cpu = x86_64
build_os = linux-gnu
build_vendor = unknown
builddir = .
datadir = ${datarootdir}
datarootdir = ${prefix}/share
docdir = ${datarootdir}/doc/${PACKAGE_TARNAME}
dvidir = ${docdir}
exec_prefix = ${prefix}
host = x86_64-unknown-linux-gnu
host_alias = 
host_cpu = x86_64
host_os = linux-gnu
host_vendor = unknown
htmldir = ${docdir}
includedir = ${prefix}/include
infodir = ${datarootdir}/info
install_sh = ${SHELL} /home/rgb/Src/Projects/wulfware/install-sh
libdir = ${exec_prefix}/lib
libexecdir = ${exec_prefix}/libexec
localedir = ${datarootdir}/locale
localstatedir = ${prefix}/var
lt_ECHO = echo
mandir = ${datarootdir}/man
mkdir_p = /bin/mkdir -p
oldincludedir = /usr/include
pdfdir = ${docdir}
prefix = /usr
program_transform_name = s,x,x,
psdir = ${docdir}
sbindir = ${exec_prefix}/sbin
sharedstatedir = ${prefix}/com
srcdir = .
sysconfdir = ${prefix}/etc
target_alias = 
top_build_prefix = ../
top_builddir = ..
top_srcdir = ..

#========================================================================
# This is a Makefile for the libdieharder library, part of the
# overall dieharder package.  It has a very abbreviated set of targets.
#
# make          alone should build the application.
#
# make clean    deletes the application and all object files
# make install  strips and installs application and a man page
# make printout prints out all source and include files
# 
# These two commands execute in the toplevel project directory only.
# make svn      does a svn commit and creates the timestamp $(SVN)
# make sync     does a svn commit and rsyncs to list of hosts
#========================================================================
PROJECT = wulfware
DIR = libwulf
SVNTREE = $(HOME)/Src/svn-tree
SVNPATH = $(SVNTREE)/$(PROJECT)
SVNTIME = $(DIR:=.svn.time)
VERSION_MAJOR = $(shell expr $(VERSION) : '\(.*\)\..*\..*' \| $(VERSION))

# This is the library from which both wulfstat and wulflogger (and maybe
# other stuff in the future) is built.
PROGMAN = libwulf.3
# (FC "requires" no static library build)
# PROGLIB_A = libwulf.a
PROGLIB_SO = libwulf.so
PROGLIB_SONAME = libwulf.so.$(VERSION_MAJOR)
PROGLIB_SO_VERSION = libwulf.so.$(VERSION)

#========================================================================
# Define all sources.  Note that we choose to depend on ALL the includes
# in the include directory, which cannot be empty or this will barf.
#========================================================================
LIBINCLUDES = $(shell ls ../include/wulfware/*.h  2>&1 | sed -e "/\/bin\/ls:/d")
LIBSOURCES = $(shell ls *.c  2>&1 | sed -e "/\/bin\/ls:/d")
LIBOBJECTS = $(LIBSOURCES:.c=.o)
DEFINES = -DVERSION=$(VERSION)

#========================================================================
# printout makes an enscript -2r printout of SOURCES and
# and INCFILES.  Use lpr if you don't have enscript
#========================================================================
# LPR = enscript -2r
LPR = lpr
all: all-am

.SUFFIXES:
$(srcdir)/Makefile.in: # $(srcdir)/Makefile.am  $(am__configure_deps)
	@for dep in $?; do \
	  case '$(am__configure_deps)' in \
	    *$$dep*) \
	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
	        && { if test -f $@; then exit 0; else break; fi; }; \
	      exit 1;; \
	  esac; \
	done; \
	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu libwulf/Makefile'; \
	$(am__cd) $(top_srcdir) && \
	  $(AUTOMAKE) --gnu libwulf/Makefile
.PRECIOUS: Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
	@case '$?' in \
	  *config.status*) \
	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
	  *) \
	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
	esac;

$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh

$(top_srcdir)/configure: # $(am__configure_deps)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(ACLOCAL_M4): # $(am__aclocal_m4_deps)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(am__aclocal_m4_deps):

mostlyclean-libtool:
	-rm -f *.lo

clean-libtool:
	-rm -rf .libs _libs
tags: TAGS
TAGS:

ctags: CTAGS
CTAGS:


distdir: $(DISTFILES)
	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
	list='$(DISTFILES)'; \
	  dist_files=`for file in $$list; do echo $$file; done | \
	  sed -e "s|^$$srcdirstrip/||;t" \
	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
	case $$dist_files in \
	  */*) $(MKDIR_P) `echo "$$dist_files" | \
			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
			   sort -u` ;; \
	esac; \
	for file in $$dist_files; do \
	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
	  if test -d $$d/$$file; then \
	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
	    if test -d "$(distdir)/$$file"; then \
	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
	    fi; \
	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
	    fi; \
	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
	  else \
	    test -f "$(distdir)/$$file" \
	    || cp -p $$d/$$file "$(distdir)/$$file" \
	    || exit 1; \
	  fi; \
	done
check-am: all-am
check: check-am
all-am: Makefile
installdirs:
install-exec: install-exec-am
install-data: install-data-am
uninstall: uninstall-am

install-am: all-am
	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am

installcheck: installcheck-am
install-strip:
	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
	  `test -z '$(STRIP)' || \
	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
mostlyclean-generic:

clean-generic:

distclean-generic:
	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)

maintainer-clean-generic:
	@echo "This command is intended for maintainers to use"
	@echo "it deletes files that may require special tools to rebuild."
clean-am: clean-generic clean-libtool mostlyclean-am

distclean: distclean-am
	-rm -f Makefile
distclean-am: clean-am distclean-generic

dvi: dvi-am

dvi-am:

html: html-am

html-am:

info: info-am

info-am:

install-data-am:

install-dvi: install-dvi-am

install-dvi-am:

install-exec-am:

install-html: install-html-am

install-html-am:

install-info: install-info-am

install-info-am:

install-man:

install-pdf: install-pdf-am

install-pdf-am:

install-ps: install-ps-am

install-ps-am:

installcheck-am:

maintainer-clean: maintainer-clean-am
	-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-generic

mostlyclean: mostlyclean-am

mostlyclean-am: mostlyclean-generic mostlyclean-libtool

pdf: pdf-am

pdf-am:

ps: ps-am

ps-am:

uninstall-am:

.MAKE: install-am install-strip

.PHONY: all all-am check check-am clean clean-generic clean-libtool \
	distclean distclean-generic distclean-libtool distdir dvi \
	dvi-am html html-am info info-am install install-am \
	install-data install-data-am install-dvi install-dvi-am \
	install-exec install-exec-am install-html install-html-am \
	install-info install-info-am install-man install-pdf \
	install-pdf-am install-ps install-ps-am install-strip \
	installcheck installcheck-am installdirs maintainer-clean \
	maintainer-clean-generic mostlyclean mostlyclean-generic \
	mostlyclean-libtool pdf pdf-am ps ps-am uninstall uninstall-am


#========================================================================
# List of variants one can make.  all is the default.  We always
# presume the simplest of dependencies and remake if includes change.
#========================================================================
all: $(PROGLIB_SO_VERSION) # $(PROGLIB_A)

# FC "requires" no static lib build/install	
# $(PROGLIB_A): $(LIBOBJECTS) $(LIBINCLUDES)
# 	ar r $(PROGLIB_A) $(LIBOBJECTS)
# 	ranlib $(PROGLIB_A)

$(PROGLIB_SO_VERSION): $(LIBOBJECTS) $(LIBINCLUDES)
	gcc $(LDFLAGS) -o $(PROGLIB_SO_VERSION) $(LIBOBJECTS)
	ldconfig -n .
	ln -sf $(PROGLIB_SO_VERSION) $(PROGLIB_SO)

#========================================================================
# The only safe place to do commits is in the toplevel directory
#========================================================================
svn:
	(cd ..;make svn)

sync:
	(cd ..;make sync)
printout:
	$(LPR) $(LIBSOURCES) $(LIBINCLUDES)

#========================================================================
#  A standard cleanup target
#========================================================================
clean:
	rm -f core $(PROGLIB) $(PROGLIB_NAME) $(LIBOBJECTS) $(PROGMAN).gz

#========================================================================
# This is critical.  For the toplevel rpm build to succeed,
#  make PREFIX=/usr install
# (run by rpmbuild from the specfile) has to work, in the right order.
# This target has to install precisely the files required by the
# specfile for the dieharder package, in precisely the right locations.
#========================================================================
install: $(PROGLIB_SO_VERSION) $(PROGMAN)
	(install -d $(libdir); \
	install -m 755 $(PROGLIB_SO_VERSION) $(libdir)/$(PROGLIB_SO_VERSION); \
        ln -sf $(libdir)/$(PROGLIB_SO_VERSION) $(libdir)/$(PROGLIB_SO); \
	install -d $(includedir)/wulfware; \
	install -m 644 ../include/wulfware/*.h $(includedir)/wulfware; \
	install -d $(prefix)/share/man/man3; \
	gzip -c -9 $(PROGMAN) > $(PROGMAN).gz; \
	install -m 644 $(DIR).3.gz $(prefix)/share/man/man3)

# FC requires no static lib install
# 	install -m 755 $(PROGLIB_A) $(libdir)/$(PROGLIB_A); \
# ldconfig -n $(libdir); \
#========================================================================
# We give all generic rules below.  Currently we only need a rule for 
# objects.
#========================================================================
%.o:%.c $(LIBINCLUDES) Makefile
	$(CC) -fpic -c $(CFLAGS) $<

# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT:
